Planning Your Network Refresh
Lessons from ATLIS Schools
Presented by:
Chris Keller, director of information technology at Pembroke Hill School in Kansas City, Missouri, joined Pierce Lannue, solutions engineer at Meter, for a candid conversation about replacing a school’s network. Keller explained what started it: a renewal quote that caught him off guard and aging equipment due for replacement across two campuses. He walked through how he made the case to school leadership, why he scheduled the switch for the Fourth of July week, and what went wrong in the first days, from older building systems to Wi-Fi that didn’t work the way he wanted. He also shared lessons he’d pass along, starting with tracking down building blueprints early. In Q&A, attendees asked about content filtering, boarding school dorms, crowded urban buildings, and working with outside IT providers. It’s a practical, school-level account of how one refresh played out, worth a look for anyone with a refresh on the horizon.
Transcript
All right, everyone. Welcome. Today, we are going to be talking about planning your
network refresh, so a very important topic, and we're going to be looking at
lessons learned. We've got some great special guests for you here today.
I think you're really going to enjoy today's session.
Today is brought to us by our friends at Meter, and thank you guys, first of all,
for sponsoring this webinar. We're really grateful to have you.
Jenna-
Yeah
... thank you so much for coming here today.
Yes. Hi, everyone. Thanks for joining, and thanks, Ashley, for that nice
introduction. As she said, the topic for today is planning your network refresh.
We have two esteemed guests, one from the Meter side and one of our customers,
and we're just really glad you're here.
So before we kick off, in case you didn't read the abstract and you just stumbled
in, I doubt that, but what we'll cover today, we're going to just give a warm
introduction to our speakers. We'll cover a little bit the lessons learned from
what we've seen working really closely with Atlas member schools as well as other
independent schools around what makes a refresh challenging.
As I alluded to, we have a special guest, Chris Keller from Pembroke Hill School,
also an Atlas member. He's going to give you his perspective and experience, but
what we really hope to achieve out of today is more of a conversation.
So we're going to provide some time for live Q&A, and we'll see how long that takes
us. We're not holding you hostage in this webinar.
We just want to make it a good experience.
And so, yeah, please chime in, raise your hand, ask anything.
You have great people around you. So with that, let's introduce
our speakers today. And as I said, I'm Jenna, but Pierce, let's hand it off to you.
Yeah, sure thing. Yeah, everybody, my name is Pierce Lanoue.
I'm one of the solutions engineers here at Meter. Currently live in St.
Paul, Minnesota, but I lived in Eau Claire, Wisconsin.
I saw someone in the chat was also from Wisconsin, so hello, hello.
But I've been at Meter for about a year and a half.
For 10 years prior to coming to Meter, I spent all that time at a value-added
reseller doing a lot of designs, but also all the implementations for a
large amount of schools and K-12s and higher education in my area.
So that was everything from the smallest of
daycares all the way up through UW Madison and some other organizations too of
some considerable size. So, a lot of experience across routers, switches,
firewalls, Wi-Fi design was a big specialty of mine, servers and storage, and also
private cellular. So I bring all that skill set forward here to Meter and very
excited to be sharing more with you all today. And Chris, how about yourself?
Hi, I'm Chris Keller. I'm the director of information technology for Pembroke Hill
School. We're located in Kansas City, Missouri. We consist of two campuses.
One is two and a half year olds through fifth grade, and then the other one is
sixth through 12th grade. And I've been with Pembroke Hill for 13 years, and
18 years prior to that, I was in a public school out of Illinois.
Awesome, awesome. So yeah, kind of diving right into it,
the topic today, of course, is about network refreshes and how that impacts the
education space. And one commonality that is true across pretty much all of them
are going to be the notion that over the last 40 years since networking has been a
thing, right, it's always kind of a puzzle, if you will, of various manufacturers
of you've got someone making the firewalls, someone's making the switches, maybe a
third party is making the Wi-Fi access points, and you assemble it all together,
and you've got all these different management consoles, all these different
responsible parties who manufacture the hardware.
And yes, there's open protocols on how they all communicate together, but none of
those parties, I should say, have ever been desired or wanted to own
the end-to-end operations of how to plan out the refresh of that.
Are they going to provide you equipment as they end of life their own equipment?
Are they going to provide you the brand new stuff?
Typically not as a part of the service or for free.
So really, that's where Meter has come into, specifically in education, be able
to provide an end-to-end platform that is going to not only cover the hardware,
it's going to cover the software, but also it's going to cover operations.
And I think our next slide really helps articulate what that means for you folks is
going to be, yep, you get the full stack network, as I mentioned.
We also do help with ISP troubleshooting and management as, again, that's no cost
to anyone. So for example, if you're working with an ISP in your area
and there's something that goes wrong at a facility at 2:00 a.m., 3:00 a.m., maybe
you've got pager alerts or maybe, unfortunately, you walk in at 6:00 a.m., 7:00
a.m., and the network's not working, right?
And a very real world example of how Meter helps with ISPs is being able to
troubleshoot those ISPs for you on your behalf at no additional cost.
So that way, you can rest assured when 6:00 a.m., 7:00 a.m.
rolls around that we're aware of the issue and perhaps we've already troubleshot
with Comcast or Spectrum or whoever the ISP is and being able to help resolve that
issue and try to take that off your plate as well.
But where I was going also with that is going to be not just the hardware, the
software, and ISP management, but the end-to-end services to help bring it all
together, including the cabling, the design, the deployment, and most importantly
is the lifecycle management piece.
Being able to say, "Hey, Wi-Fi 7 APs are what we're putting out there today.
A couple years from now, inevitably we'll have Wi-Fi 8 access points, and we will
go ahead and provide those to all of our customers at no additional cost." We are
upgrading the hardware alongside you because it is in our best benefit that
customers have the best equipment.
It also keeps our technical debt low because we don't want to have to maintain all
the software and the engineering talent, right, to maintain some of the older
stuff. So that's in our incentives and in your incentivized also to upgrade
alongside us. All of that is provided with predictable economics, meaning this is
as a subscription. It can be both CapEx or OpEx.
It does not require upfront capital if you would prefer to operate that way.
But there are some independent schools who also do want to purchase this as a
one-time payment for a certain period of time.
You can absolutely do that for a three, five, seven-year agreement, something like
that. But if it's easier to consume this billed monthly, paid annual type
thing as well with an OpEx model, that's really where Meter can help.
Again, providing you the cabling, all the hardware as that OpEx type model so that
way you don't have a big upfront expenditure can be quite a help.
And we're doing this across a multitude of independent schools.
So I think the next slide just kind of gives you a brief view here into some of the
independent schools that we're working with.
We also do have some public schools as well.
But really, our story hit home with independent schools very early
on in the Meter process. Some of the earliest ones, including Trinity Valley
Schools, Webb School of Knoxville, and Black Pine Circle School were some of our
earliest customers. And we've been expanding.
Every single year, we add many, many more education customers because really, our
model speaks home, again, as I mentioned, to our education customers perhaps the
most because they have demanding networks, right?
You've got perhaps one-to-one devices.
You've got large amounts of data that are being consumed from iPads or Chromebooks
or Windows devices for staff, faculty.
You have all these needs, and you need an access point pretty much in every room.
And the cost can add up if you are procuring that through the legacy model.
So that's why Meter does excel really well with our school customers because we're
able to provide you not necessarily individual pieces of hardware and bill you for
those. We're providing the network outcome.
We are going to provide you as much hardware as needed to fulfill the network
duties in that space. So that way, you don't not need to ask Meter, "Hey, I need 40
APs and 100 switches," or something like that.
You just say, "Hey, here's my square footage. Here's my space.
Meter, please outfit it with as much hardware as I need to get the job done." And
that's exactly what we do.
And some of the unanticipated pains of refreshes, right?
More often than not, and I saw this a ton before even coming to Meter, I see it now
that I'm at Meter as well, nothing's changed there to no one's surprise.
But there are a lot of folks who are inheriting the networks of their predecessors,
right, at their districts. Some of those decisions may have been good, some of
those decisions may not have been good.
But sometimes, right, when perhaps you are entering into a new location or a new
organization, and all of a sudden you look around, you say, "Wow, there was not
much..." Perhaps there was not much money that was being spent into the
infrastructure, the switching, or the wireless.
Or some folks may have the luxury of walking into a very nice, robust network.
But again, it may not be delivered as the model I mentioned earlier, where is the
OEM actually on the hook to help support that network and update it and refresh it
as time goes on? I'm pretty positive the answer to that would be no.
So that's at least one thing that you can also think about.
Even if you have, again, that luxurious network that you're proud to be able to
have, either, again, maybe it was given to you, maybe you built it yourself, and
that's amazing and incredible. But just thinking, going forward, what you want your
predecessors to be able to handle, and also, how do you want that consumed and how
do you want that lifecycle management to be handled, right?
Do you want someone to have to go through that procurement process every five to
seven years? Or is it easier just to say, "Hey, I've got this subscription with my
anticipated cost. I know exactly what my cost will be year to year.
And as new hardware comes out, I just get to ring Meter and say, 'Hey, I need a
couple extra switches. Hey, I need more APs in this area.'" And you have to pay
nothing for that. So, just something to keep in mind for pretty much all networks
of all sizes, even the excellent ones using the legacy model.
A couple other things, though, and then we'll talk about Chris's experience here in
just a second. But another unanticipated pain may be inaccurate or
outdated models, or the physical space in your areas.
Again, I think this speaks home to those entering into a new independent school or
a new organization, and you have to learn some of that knowledge that either is
given to you or you have to figure it out yourself if you don't have the luxury of
being able to speak to the last person in charge of the network.
Some of that may be a lot of discovery that can be straightforward or not
straightforward. Rest assured, Meter has the expertise to be able to walk into
pretty much any environment and understand exactly how that network is configured
and be able to either replicate that or, even better yet, help you
understand and make better decisions, right?
Maybe we discover, "Hey, there's some security policy rules here that don't quite
make sense. This is something that you may not want to have exposed to the
internet," or something along those lines.
We are often taking a consultative approach as well when we are transitioning to a
Meter network, so that way, not only are you getting newer hardware, faster
switches, faster Wi-Fi, of course, everyone wants that, but you're also getting an
improved security posture at the same time.
So, that's another thing I'd like to mention there too.
And last couple points there. Often, your refresh is driven by your budget versus
what your actual needs are. I felt this in my heart every time I was working
at, again, my previous employer. I was doing a lot of wireless designs, as I
mentioned, and I wanted the absolute best wireless for every single one of my
education customers because I wanted there to be sure if any AP were to fail in a
facility, I do not want there to be wireless impact in that area, right?
I don't want there to be... If one AP goes down in a gymnasium, if one AP goes down
in a classroom, that classroom shouldn't suffer, right?
The surrounding wireless should be able to service that same area.
And when I would do wireless designs like that, often it came down to cost, right?
The customer said, "Hey, this is just too costly for me.
I can't afford to have this level of wireless coverage.
I'm going to need to scale this back a little bit." That's a prime example of them
sacrificing the wireless needs in favor of cost.
With Meter, you receive all the hardware, including secondary coverage on wireless,
so that way, you will have ample wireless in your areas, making sure that any
access point could fail at any time and there still will be surviving wireless
coverage in every area. That's something I'm very proud about that Meter offers
today.
And with that, let's talk a little bit about Pembroke Hill.
So, for example, you can go to the next slide, Jenna, but I want to introduce Chris
here. Chris is a Meter customer. And Chris, why don't you go ahead and say hello,
introduce yourself. I know we gave a little bit of your background, but let's talk
about how the story began with Meter-
Sure
... if you're able to.
Yeah, sure. So, like I said, I'm from Kansas City, Missouri.
We're located right there on the state line road.
And we have 1,200 students, about 325 faculty staff.
And about this time last year, my old vendor ran...
My cycle there was January 1st to December 31st.
So this is the time of year I get the email from them saying, "Hey, you're coming
up for a license renewal. Let's talk about it." And I said, "Yep, go ahead, send me
a proposal." They sent me a proposal.
I looked, after I picked myself up off the floor to see the cost of renewing it, I
reached out to my vendor and I said, "Let's go over this licensing," because their
part numbers are so lovely, you couldn't understand what you're actually buying.
Come to find out, out of that budget, there was about six line items I could remove
because we were no longer using that product because it was end of life three years
earlier. And so I was able to at least get the price down
75%
down. And I was still
in shock of the cost to renew with them, and that didn't include my firewall yet,
which I knew was going to be a bigger chunk of change.
I kept hearing the Meter name, been to several conferences, kept talking to Meter.
"This is too good to be real. There's no way they can do this model." Went ahead
and called them up, and over... Pierce was on the first three calls because the
salesman, and of course, Pierce is the engineer,
decided to say, "Okay, this maybe sounds like worth pursuing."
Worked through, got some quotes, and it was equivalent to what I was going to be
paying for my previous vendor. The difference is, is in about two years, half of
my products were going to be coming out of end of life and end of service because
of two campuses. Over the course of five years, I updated one campus.
Two years later, I updated another campus.
So I had mixed match of models, mixed match of end of life, end of supports.
And so I knew I'd have to do some big CapEx
purchases in the coming years to get everything back
into support and out of end of life, and started weighing the cost five years down
the road. What does this look like with my locked in price with Meter, with my,
what I can assume is the cost of replacing my switches and keeping it up?
And after about five years, I saw about a $250,000 savings if I stick with Meter
and they come through and do what they say they're going to do for me.
Still a little skeptical. I reached out to about four other independent schools
that were using Meter. They were not quite our size, seven buildings, eight
buildings. We have two campuses with eight buildings on each campus.
None had two campuses. Still a little skeptical. Decided I'm going to take it.
Let's go for it. Let's do this and see what we get.
And
I signed the contracts December 1st, December 30th, somewhere in that ballpark,
with a go live of July 1st, what, four months ago.
And we did it. We jumped over July 1st, and we're three or four months into it, and
it's one of the best decisions I've made in my many years of doing this.
You want me to go into anything else, Pierce?
Or I didn't know if you had some questions or you want me to talk about the process
any?
Yeah, I think why don't we just do a little bit of...
I'll ask a couple questions, and I think some of those answers that you just
mentioned are going to come out there.
But, yeah, I'd love to just help paint the picture for everyone, exactly like you
said, right? When you say that's one of the best decisions you've made of your
career, I'm hoping some of the questions here can help extrapolate exactly what you
mean by that. Because not only is that a bold claim, but, and I'm very warm to hear
that, but I want everyone on the call here to understand why it is that you feel
that way and some of the things that we helped you with.
But also at the same time too, right, like with any network cutover,
we are under the understanding, right, that it's not always the smoothest process
either. So again, I don't think that's a surprise to anyone.
There's always a kink or two, and we can talk about that.
But just kind of starting down, just a couple questions to help kind of frame that
up a little bit. You mentioned you had two campuses.
You had end-of-life hardware with, you mentioned Extreme, that was coming up there.
So it sounds like the decision to refresh your network was indeed end-of-life and
end-of-service decision. But as mentioned, right, Meter provides the whole network,
and the firewalls weren't necessarily due yet.
So can you help explain a little bit, what made you pursue Meter anyways,
despite perhaps having a little bit of life left in some of the products or on the
firewalls, as an example, right? Did we make that enticing for you to still make
that decision?
For three bullet points stuck out with me when you say that.
Number one is, is one of the things I didn't implement and wanted to is to help
secure my wireless network by going to a cert-based authentication with a RADIUS
server. And
that was included into my cost with Meter if I decided to do it or not do it.
Extreme, that was a, yep, that's another 20 to 25,000 dollars more a year.
Okay, so that's an add-on cost. Great, thank you.
We're going to need some support here when we implement whatever it is we're
implementing. And they say, "Yep, you can, for 200 dollars an hour, we'll get you a
bucket of 20 hours, and you can use that time towards configuring your firewall,
configuring RADIUS server." I never get that charge with Meter.
I can email support and say, "Hey, how do I do this?
I'm looking to do that." And it's a response with an email.
And we had something we wanted to change Tuesday, and by Wednesday morning, the
change was made, and we were up and running with that change.
No additional cost, didn't have to do anything with it.
And then the big thing, like you said, is 24-hour support.
Our ISP updated their internet last night, and I forgot to tell Meter.
And about five minutes after the internet went down, not even that long, I got an
email from Meter saying, "Hey, just to let you know, your ISP's down.
We're reaching out to them. We found out they're doing an upgrade.
So, we'll check back when they say the window's cleared." And sure enough, the
window was cleared. They check back, yep, they said it's up and running.
We verify everything's up and running.
So I was gaining more features and functionality at no extra cost, reaching out to
someone at Meter, and no extra cost, I don't have a bucket of hours to charge
towards. And then, 24/7 support was something I've never had,
and no one really could offer that to me.
I mean, some companies will say, yeah, they offer it to you, but I didn't feel like
I was going to get it like I am from Meter.
Awesome. Yeah, I think that paints the picture very, very well.
And thank you for mentioning too, kind of our segue into the next piece, which was,
you are helping pave the way for some of those security functionalities we
mentioned there.
That's just a prime example, right?
As Meter evolves, as Meter provides additional services and products to customers,
Chris, no one, none of our customers in education, commercial, whatever vertical,
no customer has to pay an additional fee for any of those features as they come
out. So as Chris was alluding to, right, there was some cloud RADIUS components
that Meter is actively working on.
Chris has been very gracious to help even have some decision-making in that process
as far as how does it appear to K-12s and education customers in general and be
able to help make it very user-friendly. So we appreciate his help with that.
But nonetheless, right, the Meter is evolving.
So I think with that, for example, Chris, when it comes to
what you're expecting Meter to provide and what Meter is actually providing, have
we met all those expectations that you had outlined earlier?
It sounds like yes, but I just wanted to just clarify.
Yes. And right, the installation wasn't smooth at all.
But when you're doing a forklift upgrade like this, you got to expect some bumps.
The beauty of it was we picked 4th of July week to do the upgrade.
No students, a handful of those dedicated staff members that wanted to come in and
work.
And we started on one campus about two weeks early, and we found that our wireless
wasn't working the way we wanted. I was trying to keep both wirelesses up and
running, and the two don't play well together.
And the handful of classes that required internet, we gave them a hotspot to get
through with that.
Nonstop on the phone with support, and then
our engineer, we had an engineer come on site.
Luckily for us, and I hope a lot of schools had this, we have two ways to the
internet. And so we moved Meter over to our backup solution, and with that engineer
on site, before we moved anything over, we verified the Meter equipment was up and
running. We verified we can get to the internet.
Our phones, which are voice over IP, everything's in the cloud here.
Voice over IP, yep, we got those working.
We moved a couple phones over, five phones. Okay, yep, that's working great.
Now let's see if Wi-Fi is working. Yep, that's great.
And then we were able to easily pull the plug and move people over.
And the road bumps we had was our HVAC equipment is so old that they still
had 10 megabit connections. And Meter said, "No, we like to talk gigs." And I had
to drop those down to 10, lock them in at 10 megs and that.
So we did have some road bumps. My IP speakers, the way they worked on my Extreme
was totally different than the way they work on Meter, and it took a couple days to
work that out. Oh, yes, what kind of VLAN can they be attached to?
Is it a trunk port? Is it an access port?
But after we worked through those types of things, and Meter did not hesitate to
get on the phone with my IP speaker manufacturer to talk through the process of
what that's like. So yes, Meter came through and followed through on what
they said they were going to do.
I added 180, 170 additional access points than what I had,
and I thought my wireless was strong and good when I had Extreme, and now I'm
adding 180 other points. They came through, worked with my vendor to get new wiring
ran to those access points, get them up and running, and my lights went off because
I'm in a room here.
So yes,
Meter delivered on what they said they were going to do for us, and
it's been a great experience with it.
I email support, and then I've learned with Meter, normally you get a response in
about 15 minutes. If you don't, email again, and then you get a response.
So,
very rarely do I have to email twice.
But yes, you guys have delivered on what I was expecting.
No, thank you, yeah, for that context. And I appreciate too the candidness, right?
And that's why I'm an open book here on the engineering side at Meter is that I had
done countless network refreshes for all sorts of education customers,
and it never exactly goes...
It goes to plan, right? But you will always discover anytime you're changing from
one model switch to another hardware, going from, like you mentioned, right, 10 meg
devices were the bane of my existence of doing switch upgrades because sometimes
you're even provisioning switches that don't even support 10 megs.
Then you got to get really creative on how to support those older devices too.
But out of all the years I had done that,
I can probably count on one hand how many went without a flaw or without a hitch,
especially if you're doing it during the summer, and then are we counting the
times, right, when in September students roll in for the first time, and now we
discover some more nuances that maybe we didn't address during the summertime.
It just happens with networking. But just know that again, to Chris's point, Meter
was there, responsive, going on site, troubleshooting alongside Chris, right?
We're not sending him things to do via our support portal and then we wait for a
couple days for him to respond. Like, no, we are just as invested at getting the
network up and running as he is because this is the first time a networking
provider has the exact same incentives as the customer, right?
We are selling a network outcome. We are providing a network SLA to you, not just
the individual boxes to the means of an end, if you will.
So,
I think one other question too I want to ask, and this is a little bit changing
gears a little bit, but- For example, on the business side of the house, Chris, did
you have to explain anything to the business office that you weren't expecting to
from a financial lens when it came to Meter, or was it fairly straightforward?
Can you talk about that a little bit?
Yeah. I went to them, and I sold to my boss and the COO and the CFO.
I sat with them and said, "Okay, I'm thinking of doing something that I thought I'd
never do. I'm going to totally jump ship with all my firewall, my
switching, and my access points. And
I'm signing a five-year contract, and this is the cost.
It's going to cost me X every year.
But if it goes well, I will be able to save the school 250,000 dollars after five
years as my projected savings." It probably went up due to the fact of hardware
costs have went up in the last three months at a rate I didn't expect.
And so,
they, "Okay, good." And then, throughout the summers we're doing this, my boss
would stop by almost every other day, "How's it going? What do you think?
How's it going?" And my answer always was, "It's going great. We're in a good spot.
I'll know more August 20th when 1,200 students and 325 faculty and staff and
students show up, how it goes." And they came in, and it just sung like it
did in years past, and I got more compliments that my Wi-Fi was better than it was
a year earlier. Because everybody's Wi-Fi, of course, nobody does anything without
Wi-Fi. So yes, it
went over very well. We had some nice buildup.
We had 200 students come in and get their devices one day, and we're like, "Okay,
200 did good. Tomorrow's the real test when all 1,200 are here." And of course, our
upper school students, I say we got 1,200 students and 300 faculty and staff, they
all got their cell phones, they all got their personal devices in 9th and 10th
grade and 11th grade. And so, it's more than about 2,000 devices probably on our
network between the two campuses, and no dip in service.
Everything went the way it's supposed to go.
Excellent. Thank you, Chris. I think last question I have for you, as far as our
conversation piece here, and I know you've given everyone, I think, some great
tips, not only if they were a Meter customer, but just in general, right?
Like, you've seen this movie before as far as network refreshes go, so I think
you're definitely qualified to answer this question.
But what would you tell a school starting this soon, right?
Like, what hard lessons did you learn as a part of this Meter rollout, whether it
be your interaction with Meter or just a network refresh in general in 2026?
Just give us some feedback there if you can.
Sure. One of the things that I learned was, one of the first questions, I think,
Pierce, you asked it to me was, "Do you have blueprints of your buildings?" And I'm
like, "Yeah, I think so." And we're talking
some 180, 90-year-old buildings, and the blueprints were very hard to come by
and very outdated. So, number one is, if this is the route you're
going, even before, "Yep, we're going with Meter," start talking to whoever's got
your blueprints and get ahold of them, because Meter uses those to then bring in
and say, "Here's where we're putting access points." The second part of that is,
know your buildings well, because some of our buildings had walls put up, tore
down, and
I would get a response saying, "We're putting access points in these three rooms."
And I said, "Well, that's one big room now, so you don't need three access points.
You only need one or maybe two." So, I spent quality time looking over
the great documentation Meter sent me to verify it matches what our current school
looks like. And it's mainly because I had five buildings that, if the blueprints
existed, they were printed in 1910, and they were hard to read and/or not even
really equal to what we have now. That's number one.
The other thing is, I was in the process of upgrading my infrastructure to
single-mode fiber throughout, and Meter helped with that, with making sure that it
was all up to speed for what they wanted and getting that done for me, helping me
get that handled, just making sure that my infrastructure met what they were
required in their end, which was huge.
My network is even stronger than it was before, infrastructure-wise.
If you took out the equipment and all you looked at was my fiber and my cabling,
it's stronger than what it was prior to going with Meter.
Your rack space will double. So, if you think, "Okay, I had to
replace a few of my racks,"
because they build in for two reasons. One is they build in redundancy.
So,
I had one closet with two 48-port switches, so I took up 2U, and now I'm using
10U because of their distribution ports.
One of the things they're working on is right now everything is 48-port or
24-port PoE, not 48. So, every 48-port PoE you pull out, you got to put in two of
their switches as of today. That's on the roadmap.
So, your rack space will double for sure. That's one thing to be aware of in that.
Other than that,
one of the things that we did notice is how quiet their equipment is.
So, a lot of our spaces that were loud because of the fans, super quiet with Meter.
I had
another school here today and showing them some things, and they noticed it.
They didn't have to say anything. They said, "Are those switches running?" I said,
"Yeah, why? We don't hear them." I said, "Yep, they're running." So, that's one
nice thing.
I ended up over break switching out four buildings on one
campus in a matter of one day with access points and putting in their gear because
it was all so pre-configured and ready to go to begin with that I would have...
It took me longer on my first campus, and knowing what I know now, I think I could
have moved faster on my first campus than what I did to move over to Meter.
So, don't be scared of it is what I would say.
Excellent points there, Chris. Yeah. Thank you so much.
Yeah, especially the candidness, right?
Like, we understood too, the 24-port PoE thing, just so everyone knows on the call,
we understood that that was not necessarily
usable for everyone. So, rest assured, not only is that 48-port PoE switch coming,
but it's actually going to be perhaps one of the most powerful ones that you'll
find on the market, given that we'll have two kilowatts of PoE budget on that
48-port switch, and we'll be able to dish out 90 watts of PoE per port as well, in
case you have any very high power needs on some...
I know there are some cameras out there, right?
Like, physical security is always top of mind for
schools of all natures here
in present day. So, if there are any quad lens, PTZ heaters, all sorts of stuff
like that, sometimes that's where I see 90 watts of PoE being needed.
Meter switching, the next few months, we'll be able to support that.
So, more to come on that later. But thank you, Chris, so much for all the honest
tidbits there, and then the tips and tricks also for anyone who's prospecting,
perhaps thinking about Meter in the future. I think, Jenna, are we good on time?
Should we enter into the Q&A, or is there anything else that we should cover,
Chris? Yeah, let's... No, I think we should.
I'm going to actually take off share screen just so that we can see each other, and
I want to make sure we leave time for questions from the audience, so.
Yeah, we actually, we have one already waiting for you in the chat.
Oh, perfect.
So, Steve's asking about your PoEs.
Let me find that. Sorry. Or Jenna, if you enunciate it, I can answer it.
Otherwise, I can also scroll. Ah, I see there.
Okay, Steve-
PoE++.
Yeah, great. Hopefully, I can answer that.
So, not only is it PoE++, I know some other manufacturers have all sorts of names
for it. Like Ubiquiti, I think, calls it PoE+++.
But anyways, 90 watts of PoE, which I have seen also called PoE++, like I think
class four or something like that.
So, very, very high PoE output on that 48-port switch that's coming in the next few
months. The 24 ports that we provided Chris, as far as what's shipping right now on
the truck, is PoE++ or 60 watts of PoE capabilities on those switches.
So, hopefully that answers that question for you.
I see Heather is asking, "Do you offer app or web control through your firewall?"
The answer to that is yes. We do have two mechanisms of which you can use for that.
One may include DNS security, which can, of course, filter DNS requests as they
flow through the box for explicit content or whatever your filtering policies may
be. The other mechanism is through our application identification, which can look
for-
Sorry, right when I was like, "Man."
Oh, sorry about that.
The other mechanism is through application identification on the firewall, being
able to, again, detect applications that may be explicit or ones that don't meet
your policy, and we can block that traffic through the firewall.
I do like to call out here, just because, again, working in the education space for
so long, that method of filtering may not be enough
for some. I'm sure everyone on the call can relate, right, that kids of all ages
become very, very expert-level hackers at trying to bypass filters.
It's like a game of whack-a-mole that is plaguing every single IT person at any
school. But nonetheless, we do recognize sometimes that that may not be enough
filtering, so we also do play very well with third-party content filters, whether
that be inline between a firewall and a switch, or better yet, if it's
software-based on the actual endpoint, thinking of things like,
there's all sorts of ones out there, like Airsaddle K12 is a good one, Content
Keeper, Securely, some other ones too that all have client apps.
Meter does play well with all of those, so hopefully that answers that question of
yours.
Let's see here. Michael says, "I'm curious how boarding school environments are
handled. Old buildings, high-density devices in dorm rooms, faculty live in dorms
and require their own network for IoT." That is a great question, yes.
So that, in my head,
looks more like higher education, right? With, like you said, dorms.
And we have specific applications and specific hardware built for those customers.
I'm sure you've seen them probably, like our wall plate APs.
Those wall plate APs have four Ethernet ports on the bottom of them, so we see that
a lot in higher ed as well as hospitality, like hotels and things like that.
But nonetheless, placing one of those either in every room or every other room,
depending on the RF design. But you can utilize those wired ports.
We see a lot of the times, especially in dorms, that speed and latency become very
important to gamers, of course, as well as other high throughput needs that may be
in those spaces. And those access points that we provide excel very well in that
space, right? Being able to provide that wired connection for the Xboxes or the
wired devices, but still have great wireless coverage in that space as well.
And then from a software lens, right, being able to carve out a special network
that may be for the faculty, that's different, may be moderated to a lesser degree
than perhaps the student network or whatever your policies may be.
We are able to adopt and accommodate all of that just through different policy
managements, either through one SSID or multiple SSIDs, but that's how we've
addressed that today.
Great. Thank you.
Yeah, of course. Let's see here. Similar question.
"How well do you work in densely populated urban environments like New York City,
where we are awash in signals and wireless coverage from other organizations in
buildings?" Another great question.
So RF design, I alluded to it earlier, but RF design is very, very important to
Meter. We do provide, again, as mentioned, secondary coverage, which means there is
going to be overlapping wireless from a Meter perspective in every square foot of a
facility that is a Meter customer.
With that, we understand that, hey, we always don't have control of the neighboring
wireless in that space, and we need to actually work within the confines or the
lines drawn for us in that facility.
And that sometimes has ranged from either bringing down our channel width in order
to support, like, hey, our channel width going from, like, for example, in 5
gigahertz, maybe we're going from 40 megahertz wide to 20 megahertz wide.
Yes, there may be a speed sacrifice there, but if we do that by picking a channel
that is now not overlapping a neighboring channel that is heavily in use by a
neighbor or a tenant that's nearby, we have now, again, sacrificed speed, but now
we have an excellent quality of signal there.
And that type of design work is done for every single Meter customer.
That does include shipping hardware and called observers, which allows us to
actually, as the name would imply, observe the wireless in your space and be able
to say, "Hey, I see high channel utilization on this channel and this channel, so
I'm going to make sure that my automatic channel planning software does not use
this channel because of how much it's being utilized by the neighbors in spaces
that you can't control." So we do take a lot of care and thought into our wireless
designs. Again, whether you own the space or not, we will be able to observe and
understand what the wireless is like to make sure that it is as performant as
possible.
Let's see here. I think, Chris, we have a question for you perhaps.
Chris, can you mention again on the cost of Meter over a period of five years
versus the alternative?
Yeah.
Yeah, just go ahead and take that one, Chris.
So, I annually would renew my Extreme equipment and then my firewall.
Now, I got two campuses which require two firewalls with two distinct license for
each firewall. I would renew my Extreme license every year, and my
firewall, I'd normally sign a three-year contract.
So all I did was take what my contract was, just to say, for argument's sake,
$100,000 a year with Extreme, and then it'd be $25,000 a year for my two firewalls,
and all I did was add 3% to 5% to that based on every year because of lovely
increase in costs, and compared that to what I'm signing as a five-year contract
with
Meter. And towards the end, and then I also put in there that there was
22 to 25 switches that were coming end of life that I'd have to replace, so I got
the rough cost of those and compared those two costs together to say, "Okay, after
five years, for me to stay with Extreme and make sure my products were still within
service support and that, it's going to cost me..." I don't remember the number off
the top of my head, half a million dollars after five years.
But if I stay with Meter at this cost, I'm going to come in at $240,000.
So I'm going to be able to save $250,000 by knowing that Meter's promising me the
latest equipment, it will always be within support.
And I almost looked at a seven-year contract and then backed off a little bit just
because of,
I want to make sure five years seemed like the right fit for me and that kind of
stuff. So I hope that answers your question of how I did the math over years.
Because I own the equipment with Extreme, but I don't own support.
I'd always have to pay for support.
And so with Meter, I'm renting the equipment, and I feel like I'm getting the
support for free.
Mm-hmm.
So...
Excellent answer there to that. Last second part of that question was how well do
you work with MSPs? We do have a fair amount of MSPs signed up for Meter, but what
I would say to that question is if you have an MSP that you work with that you
really like, just simply ask them, like, say, "Hey, have you heard of Meter?
Do you utilize Meter, or do you guys manage Meter networks?" Things like that.
Or you can help broker an intro, and we can definitely talk to them and see what
kind of relationship we may have already or may be able to build.
So I just wanted to address that piece there too.
Can I ask a follow-up on that, Pierce?
Sure.
So on the MSP, like, our MSP generally monitors our network and does all that.
That's what we have them for, so I can not have to wake up at night if I don't want
to, and/or I can sleep well at night.
So, like, would I need them for that, or is that something you guys would do?
What I would say is Meter can be complementary to MSPs.
We do have some customers with the services that their MSPs are providing them.
Maybe they were just slim enough to where Meter was able to help cover those
needs, and maybe there was not necessarily a need for that MSP anymore.
Now, with that being said, Meter is a partner-friendly organization, and we don't
want to necessarily displace MSPs, right?
And because they have a business model that works for them.
So what I would say is I think getting both Meter and the MSP into a room and being
saying, "Hey," this is something I've helped with quite often, honestly, is kind of
a RACI chart of, "Hey, who is responsible for what?
What does Meter provide the customer or you, and what does the MSP provide you?
And then is there overlap here, or are there services that the MSP is delivering to
you that Meter is not?" Because again, MSP, it's very vague and very, very wide
what they can deliver, right?
Yeah. There's SOC services that Meter does not offer customers, but that an MSP might,
right? Like, if there's remediation or response to security events, that is
something that you could very well benefit from with an MSP that Meter doesn't
necessarily take on today. So just wanted to put that out there that it can be an
interesting conversation, but the best thing is to just, let's be honest and
transparent, and let's, again, make a RACI chart of who's responsible for what, and
that can help really drive that conversation.
But you guys could manage the network while I work with the MSP on the
cybersecurity side of things, because that would be a-
That's right
... world that would exist together. Okay, thank you.
That's right. Yep, absolutely. These are great questions. I'm loving this so far.
This is awesome. I see there was a question about consulting on network
design. For example, our network was designed for wireless 15 years ago.
Modern networks need more APs, more drops as the service includes a redesign.
Yes, that is one of the best things about Meter.
That is, again, it means near and dear to my heart, being from, again, a wireless
design nerd for so many years. That is absolutely one of the best reasons to
consider Meter, if anything. Again, Chris mentioned
that the cabling and infrastructure upgrades that Meter can provide and help also
consult on is for you to be able to amortize that over the course of your Meter
agreement is pretty incredible, right?
Like, to not have this massive upfront purchase of all this expensive single mode
fiber and CAT6A cabling, that is a very big value in and of itself,
outside of all the hardware that you're getting and the life cycle management and
everything else we mentioned. So, yes, you can consider it consulting services from
that regard. We do Hemina designs, a wireless design tool, if you're familiar, for
all of our customers. So you will receive a wireless design that is going to be
built to today's standards and not necessarily where your APs are today.
Because Meter, honestly, when a customer says, "Oh, I have lots of APs today.
Just go ahead and replace them one-to-one," we say, "Hey, we respect that someone
put that together. It could have been you, Mr.
Customer, but we do want the absolute best wireless network possible so that way
you're calling support less, Meter has less to necessarily troubleshoot and worry
about. We're going to come in with another design anyways.
Perhaps there's overlap and we can use some existing cables." But like Chris
mentioned, right, we added a significant number of APs to his wireless design
because we want the best for you. We want it to be resilient and robust and very
fast and low latency and all the things that you want as a network, we want that
for you too. So I just wanted to touch on that.
But it's a resounding yes, that is included.
The curiosity on the certificate-based Wi-Fi implemented with Meter.
What are your recommendations for radius hosting?
Yeah, so I touched on it a little bit, but Chris and I are working together right
now. Meter announced a number of months ago that Meter is releasing Meter NAC,
which is our cloud-hosted radius offering.
And what that means is now, for example, again, I mentioned Chris is going to have
some really great input on how this is going to look and drive along with our
engineering team and myself as we're building this out.
But the idea is that you can bring forward, at least upon its initial launch, you
can bring forward your existing PKI or perhaps, I know Microsoft Entra has their
own PKI that they offer now as far as Intune customers.
But nonetheless, you can bring forward an existing PKI, upload a root cert or maybe
a subordinate cert to Meter NAC, and then what we can do is we can trust that
certificate and then basically anything that's been issued by that CA, we can
authenticate onto the network. We can look at the specific entries in the subject
alternative name or some other certificate fields to say, "Hey, this is a student
Chromebook. We're dropping this on the student VLAN. Oh, here's a faculty machine.
This is going into the faculty VLAN," or, "This is getting this security policy,"
that type of thing. That is the way we're going about Meter NAC from a PKI
perspective. I know that was very important to Chris when we had our earliest
discussions. He was very, very pleased that we were
down the road as far as conceiving the idea of providing Meter NAC, and that was,
again, enough for him to say, "That's awesome. Sign me up.
I want to be one of the earliest adopters of that." And he's going to be very
integral in the look and feel of it as well. So that's how we think about it too.
We do have other customers that are using, like Asal mentioned in there, SecureW2
is a phenomenal product. We can absolutely utilize that root CA as well and onboard
customers through that mechanism.
We can point our own hardware at cloud-hosted radius servers like IronPort, I
believe is one, FoxPass, Portnox.
Those are all very cloud-centric radius platforms that we do support today as well.
So we're building out Meter NAC. It's included at no additional cost to you.
If you have one you really like today, you can keep it.
If you want to leverage Meter NAC when it's available, absolutely, let's talk about
it. Let's maybe trial it or POC it. But that's how I would address that.
Let's see here. How are we on time? Are we still good on time, Jenna, for a few
more questions? I just want to make sure. This is going great, yeah.
Yeah, it's amazing, the engagement. Thank you all for the questions.
I think we have time for a few more. Yeah, we didn't expect to go this long, so if
there are maybe one or two last questions before we go on our merry way.
But I'm so glad. Thank you all for being so engaged.
Sure thing. So yeah, I see Luis asked, "If we decide at a later point to end the
relationship with Meter, what does that look like?
Do you take everything back and over what timeline?" That is a very good question.
Of course, the hope is that customers stay with Meter and that the experience is
great, but we totally understand.
In fact, we see it sometimes in commercial accounts, right?
There may be a happy customer on Meter, but then a larger company acquires that
smaller company that was a Meter customer, and they say, "Hey, we have a corporate
mandate. We're using XYZ hardware, software.
We need to remove Meter." Just so you know, it is a very friendly process.
It is not something where there is this hostile, like, "All right, we're going to
shut down everything on this day," and there's nothing like that.
We do have mechanisms to off-board customers.
Meter does, as a part of its subscription agreement for customers, whether it's
CapEx or OpEx, just so everyone knows, Meter does retain ownership of the hardware.
So we do need the hardware back eventually.
But we are very, very lenient where we work with our customers.
We want the experience to be okay and positive, right?
Even if you're exiting the agreement, our hope is that one day, a year, two,
however many years down the road, the experience was so positive that you consider
Meter again one day. So it's never going to be this hostile, kick someone out of
the house or evict them type of thing.
We will work with you to transition the network and the configurations to new
hardware. We'll give you all of the exports of the configs.
We'll even help with the VLAN IDs and cross-connects, bringing up the new network
temporarily while we then off-board and remove our equipment.
But the cabling and all the fiber that went into your network does stay.
That is yours. We do not take that back or rip that out. That would be crazy.
There's no reason for us to do that.
That's considered part of the agreement that you've already paid for.
So that's a piece that does stay, but Meter-branded hardware does come back with
Meter.
Thank you very much.
Yeah, of course.
I don't see any questions, and the one thing we didn't touch on is your user
interface to manage the Meter network. I just want to touch on that.
It is a beautiful web interface. We've got two campuses, like I said.
We just drop down and choose which campus.
We click on what switch we want to use and port and management, manage the
VLANs.
Support is very friendly when we call in and say, "How do you do this?" They don't
do it for us. They say, "Click here, go here, do this. How do you want it?
Okay, if you want it that way, you do this." And they teach us along the way that
our support calls have really gone down tremendously since we went live with them,
and we feel very comfortable. So I wanted to also make sure that out of all the
systems I've used, this is probably the best interface I've seen to be able to do
port-based management as easy as just clicking buttons.
CLI is gone for good, finally. I like CLI, but
if you do CLI and you forget to use that real save button and then the switch
reboots, you're in trouble because it didn't save your last config.
So their interface is wonderful and very straightforward and easy to use.
I also want to throw that out there.
Oh, thank you, Chris. Yeah, that's a great point.
Yeah, we designed the interface to not only be user-friendly, but it still is
robust enough to be able to turn the specific knobs that you may need to turn for
your specific organization, right?
So just because we tried to simplify it and abstract it as much as we can from some
of the complex controller interfaces that I know I've experienced over the last 10,
15 years, some of them just require Java and all these other things, right?
We've gone away from that, of course.
It is all cloud-hosted, dashboard-managed equipment, but yet at the same time, with
being simple, it is also being able to make those changes and tune those knobs
as you need to for your specific org.
And I think there's one more question I haven't answered yet, but it's a very
important one, and I think I should have addressed it at some point in the call,
but didn't. There was a curiosity around the brands of hardware we're using for our
Wi-Fi and firewalls and switches.
It is very important for me to say that Meter designs and manufactures all of its
own hardware. So the hardware we are installing is Meter-branded switches and
access points and firewalls. These are not white-labeled or rebranded pieces of
equipment from any of the big OEMs like Cisco, Extreme, Aruba.
This is all Meter-designed and manufactured equipment.
So that is a very good question. It was one of the earliest points I think I had
made in the preso, which was about networks have been assembled together using
various manufacturers for so long, right?
And I even see some of the comments to that question in Zoom, right?
Like Ruckus Wireless, 40 gig firewall, HP switches.
That's a tried and true example of building a network using very well-known
providers in those respective spaces.
Also same thing for Cisco switches and controller, and WatchGuard firewalls are
great too. The thing is, is that when you have even great manufacturers like that,
because there's this disconnection between, okay, someone's responsible for the
firewall, and if I have a firewall issue, I call the firewall company, and if that
company says, "No, we're seeing issues actually on your core switch," well, now you
got to open a support case with the manufacturer of the core switch.
And then you've got this finger-pointing that happens when you have
manufacturers that aren't manufacturing the whole stack like that.
That is why Meter is here to provide such an excellent support construct, like
Chris has mentioned, right? Being able to understand every single hop in the
network from the wireless client to the AP, AP to the switch, switch to the
firewall, firewall to the ISP. By having that full picture, hopefully everyone can
agree that when you've got one party that's responsible for all of that hardware,
it makes troubleshooting much quicker, it makes troubleshooting much easier.
You're opening less support cases, you're spending less time on the phone, you're
not waiting 48 to 72 hours from tech responses from those various companies.
There's a lot of benefits to having one manufacturer.
So I just wanted to outline that piece there because I do think it's very important
that everyone have that as a takeaway for sure from this, is that Meter very
proudly manufactures its own hardware and puts them into those customer
environments.
That was it for the Q&A. I think just-
There's one last one there that I think is important.
After Meter is implemented and going along smoothly, but campus and buildings
change after a couple years, what does that process look like since now some of the
original design may not be adequate anymore? Is there additional cost?
That is a very good question. The answer to that question is going to be, you do
not pay anything more if the size of your space does not increase.
So as a part of that expand or shrink, right?
If you're expanding, if there is additional square footage being added to your
facility, that is an expansion to the square footage, which is how Meter bills.
So that way there is a cost that is incurred with that, but again, you're not
saying, "Hey, I'm adding a wing. I need five switches and 20 APs." You're saying,
"Hey, I'm adding this square footage. Meter, go do your thing.
Go provide me the switches and APs for that new wing.
Give me everything I need for the excellent network I've got in the rest of the
facility. Help me with this new part of the facility." That is how we bill there.
Shrinking does become a little bit interesting.
There are some contractual things that customers can bring up in the sales process
if you do expect a facility to shrink for any reason. I see that less in education.
I see that more a little bit in commercial, but it's something to discuss with a
Meter representative that say, "Hey, if you are expecting a facility to shrink in
the next five years, go ahead and bring that up," and there can be some contractual
things to discuss there and make that a possibility without having to necessarily
incur any costs or any sort of penalties for that. But that's a good thing.
And I think the last thing would be if you are redesigning or reorganizing a
facility, but you're not expanding the walls, like for example, the use case I see
all the time is, "Hey, we had this older gymnasium, and now we've turned it into
five classrooms," or something like that.
"We used to have one AP or two APs in the gym, and now we need one for each
classroom," or whatever have you.
Meter provides all the hardware and all the cabling to accommodate your space in
your building. That is, again, that's what you're paying for.
You're paying for a network outcome in your space.
And because your space is changing, you should not incur any additional costs there
just because the space is changing. Again, not expanding.
That's kind of a different construct there.
But yeah, if you're remodeling and you're changing the way things are laid out,
there is no cost to you for any additional hardware or anything like that.
That was another great question. Last note, I think, just on some takeaways real
fast, and I know we only have one minute.
Jenna, I'll give you the closeout here,
and Dr. Cross as well. But few other things I would just have as takeaways.
If any of this was interesting to you, reach out to Meter just for a chat.
You can say, "Hey, I'm interested. I saw this webinar.
I would love to chat more." I would be remiss if I didn't mention, I do see, I
think Dave Leonard was on the call. Whenever I hear him, I think of E-Rate as well.
Meter is E-Rateable for those who do utilize E-Rate.
I know maybe a little bit less common in some of the independent school spaces, but
if you do leverage any sort of E-Rate funds, just keep that in mind that Meter is
E-Rate eligible. And then lastly,
I think just keep us in mind. Just know that we're here to help grow with you.
I know there's a lot of one-man bands, two-man bands, especially at independent
schools, right? Like, your time is very precious, and you just want the network to
just work, right? Meter wants that for you as well.
So I think that's my takeaway is that we're here to help with that, give you some
of your time back, and be able to just say, "Hey, the network is the network
plumbing for you to reach all the resources, for the students to reach the
resources out in the cloud or whatever have you.
Let's make the network just easy to manage and consume and not have it be a monster
every five to seven years with refreshes and all that." So that's my end of my
spiel there.
I'm not going to say a word after that, Pierce. You nailed it. You brought it home.
Yeah, thank you all for joining today, and I'm really shocked that we went to the
full hour, but I appreciate everyone's time.
And yeah, reach out if you're interested, and hope to see you at ATLAS Conference
next year.
Pierce and Jenna, would you guys add your emails or the best contact information in
the chat? And we'll be sure to send that out with the archive as well, along with
the slides and all the resources mentioned. But thank you for being here with us.
Excellent presentation. Attendees, love all the engagement.
Thank you for all the questions for Pierce. Great session today.
And Pierce, you did an awesome job on the hot seat.
Chris, thank you so much for being here and sharing the school perspective as well.
So great job, everybody, and we hope you have a fantastic day.
Thank you so much, Jenna.
Bye, everyone.
Appreciate it. Bye.
Bye all.
Thanks again, Chris.